adBlueOBD2 for VOLVO Trucks
adBlueOBD2 VOLVO adBlue/DEF and NOx Emulator via OBD2
Plug and Drive Ready Device!
Drive your truck without Diesel Exhaust Fluid!
adBlueOBD2 is a Plug&Drive Ready device tomulate working adBlue systems and NOx sensors on trucks,
which equipped with EURO 4/5/6 catalytic converter systems, even with damaged adBlue SCR system.adBlueOBD2 is easy to install. Just plug it into the OBD2 connector of Truck and remove the fuses mentioned.?
Installation and Calibration
a) Pull the Key out from the ignition.
b) Remove the following Fuses (VOLVO)
c) Plug adBlueOBD2 into OBD2 connector
d) Turn on the ignition and check the level of adBlue, if it shows 50% or 70%.
e) If any fault light appears on dashboard, delete via service scanner.
What is adBlueOBD2
adBlueOBD2 is a device which can be plugged into OBD2 connector of your truck to emulate working
Adblue system and NOx sensor on trucks, even with damaged adBlue SCR system.
adBlueOBD2 is designed to disable adblue systems and NOx sensors on the trucks which equipped with
EURO 4/5/6 catalytic converter systems. adBlueOBD2 is very easy to install.
Just Plug it into OBD2 connector of truck or bus. adBlueOBD2 will override adBlue system instantly,
it will stop the usage of adBlue liquid and disable Nox sensors,
without any power loss of the engine or any warnings on the dashboard and in diagnostic system.
adBlueOBD2 does not damage the engine and not cause any negative effects to the truck factory setting.
adBlueOBD2 does not change any of the settings permanently. To turn back to the truck's original settings,
just unplug adBlueOBD2 from OBD2 connector.
AdBlue/DEF (Diesel Exhaust Fluid) is used to reduce NOx emissions in vehicles.
We recommend you to use adBlue/DEF fuel. You can use this device,
if you are unable to find a station to fuel up your adBlue/DEF tank.
Certificates : CE / RoHS
- adBlueOBD2 Emulator Box Interface
- User Manuel English