New design Citroen/Peugeot Lexia3 pp2000 diagnostic Diagbox V7.83 (921815C)
Click image for Gallery

New design Citroen/Peugeot Lexia3 pp2000 diagnostic Diagbox V7.83 (921815C)

  • $35.00
  • Ex Tax: $35.00
  • Brand: Lexia/Peugeot
  • Product Code: Lexia3
  • Availability:1000
  • Weight:0.50 kg
- +

     

Ask a question about this product

I wish to not have this question published


Key Word:

New design Citroen/Peugeot Lexia3 pp2000 diagnostic Diagbox V7.83 (921815C)

Diagbox V7.83


Diagbox Software Downloads:

http://www.obd888.com/downloads/DIAGBOX7.02_7.83.part1.rar

http://www.obd888.com/downloads/DIAGBOX7.02_7.83.part2.rar

http://www.obd888.com/downloads/DIAGBOX7.02_7.83.part3.rar

http://www.obd888.com/downloads/DIAGBOX7.02_7.83.part4.rar


Lexia3-PP2000 Software Downloads:

http://www.obd888.com/downloads/Lexia3_PP2000.part1.rar

http://www.obd888.com/downloads/Lexia3_PP2000.part2.rar

http://www.obd888.com/downloads/Lexia3_PP2000.part3.rar

http://www.obd888.com/downloads/Lexia3_PP2000.part4.rar

PP2000/LEXIA-3 Interface works for both Citreon and Peugeot! 

Hardware Suport further version 


1.  Software version:DIAGBOX 7.83

2. Firmware: 921815C/
 
3.  Install tips
When u install softwre,it should be Windows 7 32bits only , and must close anti-virus program.or it will deleting important software.
upgrade passwords :
* 7.02 into 7.76 are scary01.
* 7.76 into 7.82 are Maitresox01.
* 7.82 into 7.83 are Very Simple !

update attention: please cut the file "C:AWRootbinfiAPPDIAG.SYS" out before update, and then click update package! after complete update please paste the cutted file back into the previous folder. which can avoid activating problem.

4. Product update by EmaiL:
Lexia we sell is copy one ,MADE IN CHINA ,it can not update from internet directly .if has newer version,we can send u link to download and update diagbox which like former message .  If you click update directly from software ,it will be damged and can not use ,only send back for repair.


Compatible Vehicles:

It compatible with Citreon cars including, C1,C2,C3,C4,C6,C8,C-CROSSER,NEMO,BERLINGO,JUMPY,JUMPER,AX,SAXO,BX and so on.But please pay attention,according to our customer's experience,this item can not works good at C5 new models.

It compatible with  most Peugeot cars from 1995,but it can not work good with Peugeot 307 after 2004 year.

If customer have this two types of cars,please pay attention.please check with us first before purchase.

Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).

Supported functions

Unlike other universal car scanner tools which only read fault codes, this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).

The following diagnostic functions are supported:

1.Read identification

Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...

2.Read fault codes

Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").

Program supports report printing or copy to clipboard.

3.Clear fault codes

This function clears all stored fault codes and other diagnostic information.

4.Auto-scan (complete car scan/test)

Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.

5.Measured Values

Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.

6.Actuator test

Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)

Hardware and software requirements

Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed.

If customer requires, we can prepare ready to work PC.

Package includes: 

1pc x Main unit with extension OBD2 cable 

1pc x Long 9pin to USB cable

1pc x Short 9pin to USB cable

1pc x DVD

 

Language Inculding:

English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech

Write a review

Please login or register to review
Free & Easy Returns

Free return in 7 days after purchasing

Free Shipping

Free shipping on order over $1000

Gift Cards

Give the special perfect gift

Reward Points

Earn and spend with ease

LiveZilla Live Chat Software